Supports Rage AIO FREE

SirLimonSirLimon Posts: 568
edited January 2018 in Assemblies

Supports Rage is AIO (in future) support assembly

REQUIRES Ensage.SDK

Linken Protector

Glimmer Protector

Lotus Protector

Protects from more than 80 directed spells of our allies and ourselves. Protection occurs at the time of casting spells. In most cases, the enemy will not have time to react



Uses a blink if he can not reach and protect an ally

Protection occurs when the button is pressed.
It is possible to configure from what spells it is worth defending.

Lotus/Linken: all spells
Glimmer: Protects from most stuns and other dangerous abilities out allis and himself.

Glimmer CUlts

Auto use glimmer on Channeling ults (bane/cm/wd)
Can use on spell init and while its channeling
Can use on himself

auto Creep Pulling

pulling in the daytime from 1 side

pulling in the nighttime from 1 side

pulling in the daytime from 2 side

pulling in the nighttime from 2 side

Version 0.0.2 changes

hardline pulling in the daytime from 1 side

hardline pulling in the nighttime from 1 side

hardline pulling in the daytime from 2 side

hardline pulling in the nighttime from 2 side

Version 0.5 chages

- Added new camp


But this camp is hard to pull fully automatically. You can help the script at the last stage (when the hero run to allay creeps) The same can be said about the opposite camp

- Fixed IO

- Added Range pull (for ranged heroes)

- New timing system, based on creeps speed, hero aa speed and route length.

Tested on several different characters.

There may be errors with some characters. If they are found, please inform. You must specify the hero, camp and night or day so that I can reproduce the defect

How to use?

We click on the button, which is bound to the script.
Next, the script sends our hero to the desired position. We need to make sure that the creeps stand still. After that the script will automatically do everything.
Control of the script is reset if an order for movement is given.
The status is displayed next to the hero and on the top bar.

Github

https://github.com/SirOhlamon/Ensage/tree/master/DotaPullCreeps

Roadmap

  • Add more features
  • Add automatic creep stack for pulling
  • Add more places for pulling.
  • Add unusual types of pulling
  • Add ranged pull

Credits

-JungleStacker (for camp positions)

Comments

  • 9six159six15 Posts: 9

    Thank you very much for your script, we are in need of a Support Pullings

  • rayukirayuki Posts: 80

    very nice, are you able to do one for the offlane pull, it can be quite difficult to time for newbies.

  • SirLimonSirLimon Posts: 568

    @rayuki said:
    very nice, are you able to do one for the offlane pull, it can be quite difficult to time for newbies.

    I planned to do it tomorrow.
    There will be several new points for bends

  • SirLimonSirLimon Posts: 568

    New version released.
    Added new camps. More in front post

  • IdcNoobIdcNoob Posts: 1,154

    Nice pulls with ranged hero losing 50% hp kappa

  • SirLimonSirLimon Posts: 568
    edited January 2018

    @IdcNoob said:
    Nice pulls with ranged hero losing 50% hp kappa

    Nice trolling. Look closely. Even with a pool of miles radius, the hero receives 2 blows from the creep, a maximum of 3.
    Where 50% hp?

    And look at version of script, its 0.0.2. Released only basics.

  • lolkhaxlolkhax Posts: 347

    @SirLimon said:

    @IdcNoob said:
    Nice pulls with ranged hero losing 50% hp kappa

    Nice trolling. Look closely. Even with a pool of miles radius, the hero receives 2 blows from the creep, a maximum of 3.
    Where 50% hp?

    And look at version of script, its 0.0.2. Released only basics.

    That may be the case in the event the assembly works, doesn't work with IO.

  • SirLimonSirLimon Posts: 568

    @lolkhax said:

    @SirLimon said:

    @IdcNoob said:
    Nice pulls with ranged hero losing 50% hp kappa

    Nice trolling. Look closely. Even with a pool of miles radius, the hero receives 2 blows from the creep, a maximum of 3.
    Where 50% hp?

    And look at version of script, its 0.0.2. Released only basics.

    That may be the case in the event the assembly works, doesn't work with IO.

    New version relesed (v0.5). Vore info in front post

    Ensage got bug with IO attack events. I fix pulling, but i use crutch for this bug.

  • SirLimonSirLimon Posts: 568

    Updated to version 1.0.0.0

    • Assembly rebuild for Ensage.SDK
    • Added Linken Protector
  • SirLimonSirLimon Posts: 568

    Updated to version 1.0.1.0

    • Added Glimmer Save
  • SwamttertSwamttert Posts: 169

    @JoyPink said:
    Hey thanks for the script, but we have auto safe with linken and glimmer alrdy. ( yes the blink function is new ;) )
    I suggest you to add something we dont have like auto glimmer on WD or CM Ult.

    The pulling works really nice :)

    No, actually Shields from evader are not functioning like intended. It uses everything too late, like the lotus orb
    Actually this is one is good to replace until is fixed.
    Also, what kind of heroes do you suggest to pick with?
    I tried the vengefull and swapped my nearly dead ally, it's good

  • SirLimonSirLimon Posts: 568

    @JoyPink said:
    I suggest you to add something we dont have like auto glimmer on WD or CM Ult.

    Tomorrow I will add this functionality
    Plus it is planned to add protection with the help of the following subjects: force staff, lotus, hero abilities (like venga swap).
    And tomorrow i will add Rubick Rage script.
    It will be a script for the given hero with all the current functionality. Plus Rubik will be able not only to protect allies, but also to kill enemies (combo lotus + spelled, sometimes it oneshot enemy, like lina double ult).

    There are many ideas and I will gradually implement them.
    Just listen to any useful suggestions on the functional

  • Easily getting known in the community man. @SirLimon... What is the update on the techies script BTW xD

  • SirLimonSirLimon Posts: 568

    @ralph_repato said:
    Easily getting known in the community man. @SirLimon... What is the update on the techies script BTW xD

    After tomorrow's release of the Rubik script, I hope to get the developer status and the script for techies will be available.

  • LingyeLingye Posts: 1

    I can't get the pull to work for me. I bind it to a key (L) and when I press it nothing happens. Haven't tried the linkens.

  • SamplaerSamplaer Posts: 172

    that cript better then evader? rly?

  • SirLimonSirLimon Posts: 568
    edited January 2018

    @Lingye said:
    I can't get the pull to work for me. I bind it to a key (L) and when I press it nothing happens. Haven't tried the linkens.

    Sometimes the reassignment of the button does not work.
    Perhaps this is a bug of the new menu in the SDK. More precisely, I can not say yet, I also encountered this phenomenon. I'll sort it out.
    Try rebind key again. If the drawing is enabled, then you immediately understand that the script start pulling

    Update
    Yes, there is some bug. When the script is reloaded, if the button has been reassigned, the script shows that the button is changed, but in fact it remains the default

    @Samplaer said:
    that cript better then evader? rly?

    I'm not sure that it's better, but my script has a slightly different specifics, unlike Evader

  • AyushAyush Posts: 342

    @SirLimon said:

    @ralph_repato said:
    Easily getting known in the community man. @SirLimon... What is the update on the techies script BTW xD

    After tomorrow's release of the Rubik script, I hope to get the developer status and the script for techies will be available.

    Wew, been waiting for the rubick script, when do u plan on releasing it ?

  • Nice for support users :asunaderp:

  • menu not showing here

  • SirLimonSirLimon Posts: 568

    @Ayush said:

    @SirLimon said:

    @ralph_repato said:
    Easily getting known in the community man. @SirLimon... What is the update on the techies script BTW xD

    After tomorrow's release of the Rubik script, I hope to get the developer status and the script for techies will be available.

    Wew, been waiting for the rubick script, when do u plan on releasing it ?

    Today. According to the time of Moscow time, closer to 22.00

  • SirLimonSirLimon Posts: 568

    @passokarox said:
    menu not showing here

    You need install Ensage.SDK.
    Menu created based on SDK and required them

  • SirLimonSirLimon Posts: 568

    Updated to version 1.0.2.0

    • Added Lotus Save
    • Added Glimmer CUlts
  • Justic3Justic3 Posts: 131

    @SirLimon Have a question for you, if i give you a lua script would you be able to put it in net? so we can use it on ensage?
    Script is really good cant wait for techies one.

  • SirLimonSirLimon Posts: 568

    @peritajejeje said:
    @SirLimon Have a question for you, if i give you a lua script would you be able to put it in net? so we can use it on ensage?
    Script is really good cant wait for techies one.

    At the moment, I do not have any working LUA scripts. I have done this for a long time.

  • SamplaerSamplaer Posts: 172

    don't work

  • SirLimonSirLimon Posts: 568

    @Samplaer said:
    don't work

    What exactly?

  • SamplaerSamplaer Posts: 172

    does not appear in the menu

  • mrSharpmrSharp Posts: 66
    edited January 2018

    @Samplaer написал:

    does not appear in the menu

    What settings do you have in Ensage? By default, there are two buttons F7 and LeftShift, press one of them should appear and most likely should fix it, I hope it's like not convenient two different menus

  • Justic3Justic3 Posts: 131

    @SirLimon said:

    @peritajejeje said:
    @SirLimon Have a question for you, if i give you a lua script would you be able to put it in net? so we can use it on ensage?
    Script is really good cant wait for techies one.

    At the moment, I do not have any working LUA scripts. I have done this for a long time.

    i have a lua script that you might be able to put it in dot net so it works on ensage?

  • SirLimonSirLimon Posts: 568

    @Samplaer said:

    does not appear in the menu

    You should install lastest Ensage.SDK and clear assembly cache.
    Script use new menu.

  • @SirLimon said:

    @Samplaer said:

    does not appear in the menu

    You should install lastest Ensage.SDK and clear assembly cache.
    Script use new menu.

    ensage sdk insalled, cache cleared and not appears in menu yet

  • SirLimonSirLimon Posts: 568

    @passokarox said:

    @SirLimon said:

    @Samplaer said:

    does not appear in the menu

    You should install lastest Ensage.SDK and clear assembly cache.
    Script use new menu.

    ensage sdk insalled, cache cleared and not appears in menu yet

    This is the old menu.
    You need to find a new one that appears with Ensage.SDK
    Adn looklike this:

    try to switch loader channel to beta then clear assembly cache

  • SirLimonSirLimon Posts: 568

    Updated to version 1.0.3.0

    • Added Toggle keys for all features
    • Cleanups
  • si_jisi_ji Posts: 38

    Can you add a feature that auto uses Kinetic Field when using Glimpse?

  • @passokarox said:

    Hey passokarox, remember to press F9 while in game.. I know it pauses the game but you can set them to other key to see the new menu. Hope this helps!

  • @planksmith said:

    @passokarox said:

    Hey passokarox, remember to press F9 while in game.. I know it pauses the game but you can set them to other key to see the new menu. Hope this helps!

    resolved this changing to Beta channel

  • thank you

  • SirLimonSirLimon Posts: 568

    Updated to version 1.0.4.0

    • Fixed target selector
    • Added Cast Timings
    • Cleanups

    Tips: for prevent fails with items u should look at ur ally (turn time > cast time = fail)

  • Great Assemblies for support, Auto commended by TEAMMATE kappa

  • pizudepizude Posts: 8

    This script is so so so good. But many ability such as Alchemist's stun and some items such as Rejection are not surported.Especially the lotus protect,it can sometimes decide the war .So please update it ,I will sure to buy it and I think the other will buy too.

  • SirLimonSirLimon Posts: 568

    @pizude said:
    This script is so so so good. But many ability such as Alchemist's stun and some items such as Rejection are not surported.Especially the lotus protect,it can sometimes decide the war .So please update it ,I will sure to buy it and I think the other will buy too.

    Its free to use )

    Ok, will update spells

  • LemonPi3LemonPi3 Posts: 1
    edited August 29

    how to know which camp its gunna pull

  • 3zHkfc3zHkfc Posts: 2

    Shows as having a build error in the database. Does this still work?

  • I cant see it in menu too. I tried in beta, alpha, cleaned cache, upadated Ensage.sdk nothing work, also with Kunkka Helper

Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!